R 5] Reading Program Data - Brother BAS-311H Service Manual

5. USING SD CARD

5-8. [ r 5] Reading program data

1
2
3
Exit read/write mode
4
43
While reading
"PrG" appears in the tension
display.
2903B 2668B
TEST indicator switches off
Select the " r5" SD data read/write mode.
2665B
Press the ENTER key.
･
The buzzer will sound and the sewing program data
and cycle program data will be read from the SD card
and stored in the sewing machine's memory, and the
sewing programs and cycle programs will then be set.
･
If no sewing program data or cycle program data
exists, an error buzzer will sound.
When the display returns to the status in step 1, reading
of the program data is complete.
･
If you would like to use any other read/write modes,
press the △ or ▽ key to select the mode and then
run it.
2665B
Press the TEST key.
2404B
BAS-311H
2414B