4-4. Reading program data (parameters)
Exit data read/write mode.
Select the [R1] data read/write mode.
Refer to "4-3. Preparation for reading and writing data".
Press the ENTER key.
• The buzzer will sound and the program data
(parameters) will be read from the SD card and
copied into the sewing machine's memory.
• The R/W indicator will flash and "OPERATING" will
• If no program data exists on the SD card, an error
buzzer will sound.
When the display returns to the status in step 1, reading of
the program data is complete.
• If you would like to read more data, press the
key to select the read/write menu, and then read
Press any one of the following four keys to exit data
4. USING SD CARDS