Checking Method Of The Production Counter; How To Set Up The Handy Switch; How To Confirm The Software Version; How To Set Head Specifications - Brother S-7180A Instruction Manual

3. Operation panel

3-9. Checking method of the production counter

The current production counter can be checked on P41.
※When P17-N12 is set to "1", the production counter can be displayed when the power is turned on.
The counting units can be changed with P17-N06.
The counting direction can be changed with P17-N13.

3-10. How to set up the handy switch

Use P174 to set the function of handy switch A (upper row).
Use P15 to set the function of handy switch B (lower row).

3-11. How to confirm the software version

Main Control Version: This can be checked in P42-N01.
Panel Control Version: This can be checked in P42-N02.
Reverse motor control version: Can be checked on P42-N15.

3-12. How to set head specifications

In P70 the following
-3:-3 Specification
-5:-5 Specification
-7:7 mm Specification
[Precaution]
If you change the value of P70 and press the key, the settings other than P92 will return to the factory default settings.
36
S-7180A