Using The Sewing Machine (Operation Panel: Advanced Operation); Using Cycle Programs - Brother RH-9820 Instruction Manual

7. USING THE SEWING MACHINE (OPERATION PANEL: ADVENCED OPERATION)
7. USING THE SEWING MACHINE (OPERATION
PANEL: ADVANCED OPERATION)

7-1. Using cycle programs

The sewing patterns which have been registered in independent programs (P01 - P20) can be combined to register "cycle
programs" so that they can be run continuously. When sewing the sewing patterns in a certain order, it can be useful to record
them in a cycle program beforehand.
Cycle programs
Max. no. of recordable programs
Max. no. of steps
Program example
The following shows an example of storing a cycle program into cycle program C1 that consists of three steps of independent
program 01 with cutting operation on, and one step of independent program 03 with cutting operation off.
Example: Setting contents for cycle program C1
Step number
Independent program
number
Cutting operation
1
Press one of the following keys to select a sewing
mode.
(In this example, automatic mode is selected.)
0445B
2
Select cycle program number C1 (1).
0413B
57
9 (C1 - C9)
9 (the same independent program can be selected several times)
Step 1 Step 2
P01 P01
Yes Yes
The program number (1) changes in the order shown in the illustration
each time the
opposite direction.
NOTE:
Cycle program mode is not available if an independent program has been
selected.
RH-9820
Step 3
P01
Yes
Independent program
(Refer to P. 39)
key is pressed. The
Step 4
P03
No
Cycle program
(1)
0337B
0307B
key changes the order in the
0222B