Using The Sewing Machine (Operation Panel: Advanced Operation); Using Cycle Programs - Brother HE-800B Instruction Manual

7. USING THE SEWING MACHINE
(OPERATION PANEL: ADVANCED OPERATION)

7-1. Using cycle programs

The sewing patterns which have been registered in independent programs (P01 – P50) can be combined to register "cycle
programs" so that they can be run continuously. When sewing the sewing patterns in a certain order, it can be useful to record
them in a cycle program beforehand.
Cycle programs
Max. no. of recordable programs
Max. no. of steps
Program example
The following shows an example of storing a cycle program into cycle program C1 that consists of three steps of independent
program P01 with cutter operation on, and one step of independent program P03 with cutter operation off.
Example: Setting contents for cycle program C1
Step number
Independent program
number
Cutter operation
1
Press either the AUTO key or the TEST key.
(Either key can be pressed at this time.)
4838M
2
Select cycle program number C1 (1).
4787M

7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)

9 (C1 - C9)
19 (the same independent program can be selected several times)
Step 1 Step 2
P01 P01
Yes Yes
The program number (1) changes in the order shown in the illustration
each time the
(The key changes the order in the opposite direction.)
HE-800B
Step 3
P01
Yes
Independent program
key is pressed.
Step 4
P03
No
Cycle program
4890M
52