Error - Keysight Technologies N9030B Service Manual

Instrument Messages
Event Messages
Err# Message
–178
Expression data not
allowed
–180
Macro error
–181
Invalid outside macro
definition
–183
Invalid inside macro
definition
–184
Macro parameter error

0 Error

Err# Message
0
No error
122
Verbose/Correction Information
A legal expression data was found, but it is not allowed at this
point in the parsing.
A problem was found with a macro element. The exact problem
cannot be specifically identified.
Indicates that a macro parameter placeholder was encountered
outside of a macro definition.
Indicates that the program message unit sequence, sent with a
*DDT or *DMC command, is syntactically invalid
Indicates that a command inside the macro definition had the
wrong number or type of parameters.
Verbose/Correction Information
The queue is empty. Either every error in the queue has been
read, or the queue was cleared by power-on or *CLS.
N9030B PXA Signal Analyzer Service Guide