Keysight Technologies N9030B Service Manual page 568

Post-Repair Procedures
Post-Repair Procedures
1. Press Enter to proceed with the Windows XP setup.
2. When you see the Windows XP Setup Wizard screen as seen in
Figure 17-10 Windows XP Setup Wizard
3. When the Windows XP License Agreement window comes up, select "I
4. The Date and Time Settings screen is used to set the appropriate date,
5. Wait for the Windows XP Setup Wizard to complete. The instrument will
6. Once the Windows XP Setup Wizard has completed the instrument is
568
17-10, press Enter to move to the License Agreement screen.
accept this agreement" and press Next.
time and time zone. These settings will be configured later by the end
user.
Select Next to continue the Windows XP Setup Wizard.
restart itself a few times.
ready for the next step of configuration.
N9030B PXA Signal Analyzer Service Guide
Figure