Keysight Technologies N9030B Service Manual page 117

Instrument Messages
Event Messages
Err# Message
–250
Mass storage error; Pk
Table must be on to save
Pk Table as Meas Results
–250
Mass storage error; Read
fault
–250
Mass storage error;
Register <number> empty
–250
Mass storage error;
Sharing violation
–250
Mass storage error;
Spectrogram must be on to
save as Meas Results
–250
Mass storage error; Too
many open files
–250
Mass storage error; Write
fault
–252
Missing media
–253
Corrupt media
–254
Media full
–255
Directory full
–256
File name not found;
–257
File name error;
–257
File name error; Allowable
extension is .csv
–257
File name error; Allowable
extension is .png
–257
File name error; Allowable
extension is .state
–257
File name error; Invalid
file name
–257
File name error; name too
long
N9030B PXA Signal Analyzer Service Guide
Verbose/Correction Information
You have to have a Peak Table on the screen before you can save
it. Turn on the Peak Table and try again.
The system cannot read from the specified device.
Attempt to recall a register with nothing in it
The process cannot access the file because it is being used by
another process.
You have to have a Spectrogram on the screen before you can
save it. Turn on the Spectrogram and try again.
The system cannot open the file.
The system cannot write to the specified device.
A legal command or query could not be executed because
missing media.
A removable media was found to be bad or incorrectly formatted.
Any existing data on the media may have been lost.
A legal command/query could not be executed because the
media was full
A legal command or query could not be executed because media
directory was full.
A legal command or query could not be executed because the file
name was not found in the specified location.
A legal command or query could not be executed because there
was an error with the file name on the device media. For example,
maybe you tried to copy to a duplicate file name.
You are using the wrong type of file extension for the current
data/file type.
You are using the wrong type of file extension for the current
data/file type.
You are using the wrong type of file extension for the current
data/file type.
The filename, directory name, or volume label syntax is incorrect.
117