Keysight Technologies N9030B Service Manual page 453

Assembly Replacement Procedures
RF Area (Options 503, 508, 513, 526)
5. Refer to
6. Remove cable
7. Remove cable
Figure 16-19 W13, W15, and W53 Cables Removal
N9030B PXA Signal Analyzer Service Guide
Figure 16-19. Remove cable
switch center port to Front End Assembly J9.
W53 (N9020-20144) from top switch port 2 to center switch
center port.
W13 (N9020-20210) between attenuator (connected to
center switch port 1 and bottom switch port 1.
W15 (E4410-20164) from bottom
453