Keysight Technologies N9030B Service Manual page 452

Assembly Replacement Procedures
RF Area (Options 503, 508, 513, 526)
2. Refer to
3. Remove cable
4. Remove cable
Figure 16-18 W10, W14, and W54 Cables Removal
452
Figure 16-18. Remove cable
switch port 2 to YTF Assembly.
W14 (E4410-20165) from bottom switch port 2 to YTF
Assembly.
W54 (N9020-20145) from top switch port 3 to Low Band
Switch Assembly.
W10 (E4410-20163) from middle
N9030B PXA Signal Analyzer Service Guide