Keysight Technologies N9030B Service Manual page 408

Replaceable Parts
Hardware
Figure 15-10 Front End Parts (Options 503, 508, 513, 526, EP0, B2X)
Table 15-12 Front End Parts (Options 503, 508, 513, 526, EP0, B2X)
Item Description
A13 A13 Front End Assembly (Options 503, 508, 513, 526)
J1 Type-N Input Connector Assembly (Options 503, 508, 513, 526 without
Option C35)
W8 Cable, semi-rigid, Front End assy J2 to Low Band Switch J2 (Options 503,
508, 513, 526)
W16 Cable, IF Out from Front End Assy J7 to Front End Control J902
W18 Cable, semi-rigid, 2nd LO In, Reference Assy J702 to Front End Assy J1
W22 Cable, ribbon, Front End Assy control J12 to Front End Controller J102
W30 Cable, coax, Ext IF Out, A13J13 to Front End Control J903 (Option 503, 508,
513, 526) (Option EXM)
W33 Cable, coax, 50 MHz Align, Front End Assy J6 to Reference Assy J705
W73 Cable, Semi-rigid, A14J1 Synthesizer Assembly to A13J4, Front End
Assembly (Option EP0)
W74 Cable, Semi-rigid, Front End A13J9 to lower coax switch port C (Option B2X,
B5X)
W75 Cable, Semi-rigid, Front End A13J8 to W29 (Option EXM, 508, 513, 526)
408
Keysight Part Number
N9020-60129
N9039-60030
N9020-20101
8121-1862
N9020-20022
E4410-60156
8121-2027
8121-1940
N9020-20301
N9020-20305
N9020-20304
N9030B PXA Signal Analyzer Service Guide