Keysight Technologies N9030B Service Manual page 407

Replaceable Parts
Hardware
Figure 15-9 Front End Parts (Options 544, 550, EP1)
Table 15-11 Front End Parts (Options 544, 550, EP1)
Item Description
A13 A13 Front End Assembly (Options 544, 550)
J1 2.4 mm Input Connector Assembly (Options 544, 550)
W8 Cable, semi-rigid, Front End assy J2 to Low Band Switch J2 (Options
544, 550)
W16 Cable, IF Out from Front End Assy J7 to Front End Control J902
W18 Cable, semi-rigid, 2nd LO In, Reference Assy J702 to Front End Assy J1
W19 Cable, semi-rigid, AUX LO Out from Front End Assy J3 to Switched
Filter Assy J6
W20 Cable, semi-rigid, Front End Assy J4 To YTO (Options 503, 508, 513,
526 - without EP0)
W21 Cable, semi-rigid, LO Synthesizer Assy J20 to Front End Assy J5
(without EP0)
W22 Cable, ribbon, Front End Assy control J12 to Front End Controller J102
W33 Cable, coax, 50 MHz Align, Front End Assy J6 to Reference Assy J705
W57 Cable, semi-rigid, YTF output to Front End assy J9 (Options 544, 550
without Option MPB or
N9030B PXA Signal Analyzer Service Guide
LNP); see W62 if Option LNP/MPB
Keysight Part Number
N9020-60144
N9030-60011
N9020-20131
8121-1862
N9020-20022
N9020-20077
N9020-20152
N9020-20019
E4410-60156
8121-1940
N9010-20006
407