Keysight Technologies N9030B Service Manual page 296

CPU/Disk Drive Troubleshooting
Disk Drive Recovery Process
Table 9-2 Using the instrument recovery system
Step
1. Make sure the instrument is turned off.
2. Turn on the instrument.
— Press the down arrow key to move the
highlight to Keysight Recovery
System, then press
3. When the Keysight Recovery System
has booted, follow the on-screen
instructions to recover the image of the
C: drive.
— Press
recovery.
4. A warning message appears.
— Press
may take up to 25 minutes to complete.
After exiting the Keysight Recovery System, the instrument reboots.
Update the X-Series software to the latest version by downloading it from the following URL:
www.keysight.com/find/xseries_software
296
Enter
.
2 Enter
, then press to select the
Enter
to start the recovery, which
Notes
After the Keysight Technologies screen is
displayed,
This screen is displayed for five seconds.
N9030B PXA Signal Analyzer Service Guide