Cover Removing And Replacing; Figure 2-1. Removing The Cover - Thermo Scientific iQ Series Instruction Manual

Installation and Setup

Cover Removing and Replacing

Cover Removing
and Replacing
2-2 42iQTL Instruction Manual
Use the following procedure to remove and replace the cover.
Equipment required:
Phillips screwdriver, #2
1. Unfasten the four 8-32 screws securing the cover (shipping screws).
2. Press in both latches located on top cover and hold while pulling up to
remove. Set upright.
Figure 2–1. Removing the Cover
3. To replace, align cover and drop in. Latches will automatically snap in
place.
Thermo Scientific