Eject Document Guide - Canon imageFORMULA DR-X10C Service Manual

10. Eject Document Guide

1) Remove the eject tray unit.
(Page 3-10)
2) Remove 6 screws
and remove the guide plate
Figure 3-226
3) Remove 2 screws
and remove the eject document guide on
the rear side.
Note: The eject tray extension unit
pulled out at this time.
Figure 3-227
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 (M3, self-tapping)
2 .
1 (M3, self-tapping)
2 can be
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
Notes on assembling
Mount the pinion gear (left)
gear (right) 2 (with a torque limiter
as shown in the figure below.
Figure 3-228
1 and pinion
3 )
3-11