Platen Motor - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY

5. Platen Motor

1) Remove the eject tray unit.
(Page 3-10)
2) Remove the cable
platen motor.
Figure 3-712
3) Remove the entrance upper unit.
(Page 3-40)
4) Remove the reading roller (front) and
platen roller.
(Page 3-52), (Page 3-51)
5) Remove 2 screws
remove the motor unit
Figure 3-713
3-50
1 connected to the
1 (M3, round tip) and
2 .
COPYRIGHT © CANON ELECTRONICS INC. 2008
6) Remove the pulley
move 2 screws 3
remove the mounting plate
Figure 3-714
7) Remove 2 screws
remove the motor mount
platen motor .
2
Figure 3-715
1 and belt 2 . Re-
(M3, round tip) and
4 .
(M3, round tip) and
1
from the
3
CANON DR-X10C FIRST EDITION