Canon imageFORMULA DR-X10C Service Manual page 169

Table 5-301 shows the list of the service modes.
No. Button name
1 All Adjustment
2 LED Adjustment
3 Regist Adjustment
4 Analog
5 Firm Load
6 About
7 Max. Document Size
8 Dcon Check
9 Check Device
10 Sleep
11 SCSI Transfer
12 Counter
COPYRIGHT © CANON ELECTRONICS INC. 2008
Functions
Perform all adjustments related
to image reading. (CIS ad-
justment and registration ad-
justment)
Perform the CIS adjustments.
Perform the registration ad-
justments.
Perform the reading position
adjustments of the frame sen-
sor.
Display the analog value of
each sensor.
Change the firmware.
Display this service tool ver-
sion.
Set the long document mode.
Check the operation of the
hardware such as operation
keys, sensors, motors, CIS unit
LED, etc.
Display the version of the firm-
ware such as the main body
and the internal devices.
Set the sleep mode.
Set the SCSI transfer speed.
Display and change the total
scanning count, the number of
document jams, and the re-
placement counter.
Table 5-301
CANON DR-X10C FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Usage
Adjustment after replacement
of the control PCB and the
reading unit.
Measures against image fail-
ures.
Measures against leading
edge failures.
Adjustment after replacement
of the frame detection unit.
Checking operation of the ul-
trasonic sensor.
Updating the firmware version.
Checking the detailed version
of this service tool.
Using the long document
mode.
(Also available in the user
mode.)
Checking the operation of the
hardware in case of feeding
faults and image faults.
Checking the version of the
firmware such as the main
body and the ultrasonic sensor.
Changing the sleep mode set-
tings.
(Also available in the user
mode.)
Changing the SCSI transfer
speed.
(Also available in the user
mode.)
Checking the total scanning
count, the number of document
jams, and the replacement
counter. Adjustment after re-
placement of the control PCB.
5-7