Canon imageFORMULA DR-X10C Service Manual page 148

CHAPTER 4 INSTALLATION & MAINTENANCE
No.
4
After taking the cable
hole, align the lever
the main body, and secure the main body
with 2 screws
in the previous step) and screw
cessories, M3, stepped).
5 Connect the pre-imprinter cable
the connector
drive PCB.
6 Attach the operation label
operation label
7 Reinstall the removed parts.
4-10
Step
1 out through the
and positioning of
2
3 (which were removed
4
1
(J212) of the main
2
1 and lever
2 to given positions.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Details/Remarks
(ac-
to
CANON DR-X10C FIRST EDITION