Reading Pcb - Canon imageFORMULA DR-X10C Service Manual

6) Remove 3 cables
2 and remove the reading unit.
Figure 3-903
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 from the reading unit
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY

2. Reading PCB

1) Remove the reading unit (upper).
(Page 3-58)
2) Remove the connector
cables from the cable guides of 2 cable
covers 2 .
Figure 3-904
3) Unhook 2 pairs of the fitting parts
remove the cable cover
way, remove the cable cover on the op-
posite side.
Figure 3-905
1 and remove
and
1
. In the same
2
3-59