Upper - Canon imageFORMULA DR-X10C Service Manual

3. Upper Front Cover
1) Remove the eject tray unit.
2) Remove 2 screws
Figure 3-604
3) Open the pickup roller cover. Press the
rear side (marked with
1
and unhook the fitting parts inside. The
pickup roller cover opens further.
Figure 3-605
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 (TP head).
) of both arms
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) Remove 2 screws
out the upper front cover
Note: Since the internal open/close button
shaft unit is combined with a part of the
upper front cover, there is some resis-
tance when the cover is pulled out, but it
can be removed easily by pulling it.
Figure 3-606
Notes on assembling
When mounting the upper front cover, first
insert the open/close button into the hole at
the center of the upper front cover.
1 (TP head) and pull
2 to the front.
3-41