Main Motor Pcb - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
6) Remove the cable holder and connector of
cable 1 . Remove 2 screws
and remove the main motor
Figure 3-310
Notes on assembling
When installing the main motor, the cable
outlet must be on the connector side of the
PCB.
3-16

4. Main Motor PCB

2 (TP head) 1) Remove the main motor unit.
3 .
2) Remove 3 connected cables
COPYRIGHT © CANON ELECTRONICS INC. 2008
(Page 3-15)
screw 2 (M3, round tip), unhook 4 pairs
of the fitting parts 3
port and remove the main motor PCB
Figure 3-311
1 and
of the locking sup-
4 .
CANON DR-X10C FIRST EDITION