Document Feed And Eject Trays; Preparing The Document Feed Tray - Canon imageFORMULA DR-X10C User Manual

Document Feed and Eject Trays

Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.

Preparing the Document Feed Tray

Opening the Document Feed Tray
When the scanner is turned ON, the Document Feed Tray opens
automatically and moves to the specified home position height.
Hint
When opening the Document Feed Tray by hand, place your fingers
in the indents at both sides of the tray, and open it gently.
Home Position Setting
The height of the home position (the position to which the document
Feed Tray moves after it opens) can be adjusted in three steps
according to the number of document pages to be loaded (the default
setting is the lowest position, which accepts up to 500 sheets).
The height of the home position is set by the Tray Position User Mode
setting, which minimizes the time required to start feeding by
specifying in advance the proper position for the documents to be
loaded.
1
Press the Menu key on the control panel.
The User Mode is activated.
39
Menu Key