Canon imageFORMULA DR-X10C Service Manual page 145

No.
7 Connect the power cord and interface
cable.
Note:
1) Do not connect a USB cable and a
SCSI cable at the same time.
2) This machine does not include a SCSI
cable. Provide a SCSI cable that
matches the connector type of this
machine and SCSI card beforehand.
The connector type of the scanner is
"D-sub, half pitch, 50 pins".
3) If the SCSI cable is connected, turn the
computer OFF.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step
CANON DR-X10C FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Details/Remarks
Power cord
1) Connect the supplied power code to the
power connector on the rear side of the main
body.
2) Insert the power plug in a receptacle.
USB cable
1) Connect the supplied USB cable.
Type A
SCSI cable
1) Connect the provided SCSI cable.
2) Change SCSI ID if necessary.
DIP Switches
SCSI ID
2
2
1
3
OFF ON
4
5
Default Position (SCSI ID=2)
Type B
SW2 SW1
OFF OFF
OFF ON
ON OFF
ON ON
4-7