Document Jam Processing - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 1 GENERAL DESCRIPTION
7) When the set documents ran out, the scan
stops and the [Continue Scanning] dialog
box is displayed. To continue the scan, add
documents and click [Continue Scanning]
and to end the scan, click [Stop Scanning].
Figure 1-319
8) Close CapturePerfect 3.0 after scanning.
1-16

5. Document Jam Processing

If a document jam occurs during scan-
ning, the following message is displayed on
the display panel and feeding stops.
Note: The error code (Pxxx) changes ac-
1) Remove the document remaining on the
document eject tray.
2) While pressing the open/close button,
open the upper unit carefully until it stops.
Open/Close Button
3) Remove a jammed document.
If the document has stopped in the midst
of ejecting to the document eject tray,
open the upper unit slightly to remove it.
If the document has stopped inside the
main body, open the upper unit until it
stops to remove it.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Figure 1-320
cording to the location of the jammed
document.
Figure 1-321
CANON DR-X10C FIRST EDITION