Firm Load; About - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 5 TROUBLESHOOTING

7. Firm Load

This mode is used to change the firm-
ware of this machine. For details, refer to the
service information issued during firmware
changes.
Operation Procedure Outline
1) Select [Firm Load] on the service screen.
2) The screen for selecting the file, where
the firmware has been saved is displayed.
3) Select and open the file.
4) The progress screen appears and the
firmware is loaded automatically into this
machine.
Note: Do not turn the power OFF or perform
other operations during loading.
Figure 5-309
5) When the loading is finished, the progress
screen disappears.
6) Exit the service mode.
7) Reset the power of this machine.
8) In the [Check Device] in the service mode,
ensure that it is the new version.
5-12

8. About

This mode is used to check the detailed
version of the software for this service mode.
When [About] is selected on the service
screen, the version screen is displayed.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Figure 5-310
CANON DR-X10C FIRST EDITION