Ultrasonic Sensor Pcb - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
5) Remove the cable
round tip) and remove the staple PCB
Figure 3-706
Notes on assembling
Fit the cable 1 into the groove
cover. If the cable extrudes outside the
groove, it is caught.
Figure 3-707
3-48
1 and screw 2 (M3,
3
2 in the
COPYRIGHT © CANON ELECTRONICS INC. 2008

3. Ultrasonic Sensor PCB

. 1) Remove the upper front cover and en-
trance upper unit.
(Page 3-41),
2) Remove the main drive PCB.
(Page 3-46)
Note: To reserve work space for removing the
cable connected to the ultrasonic sen-
sor PCB, remove the PCB mounting
plate in the next step in addition to these
parts.
3) Remove 9 screws
move the PCB mounting plate
(Page 3-40)
1 (TP head) and re-
2
Figure 3-708
CANON DR-X10C FIRST EDITION
.