Reading Roller (Front) - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY

4. Reading Roller (Front)

1) Remove the right and left covers.
(Page 3-3), (Page 3-5)
2) Remove the frame detection unit and ul-
trasonic drive PCB.
(Page 3-39), (Page 3-20)
3) Remove the control PCB.
(Page 3-13)
Note: Remove this PCB to adjust the tension
of the belt during assembly.
4) Remove the stop ring
magnetic clutch
Figure 3-407
3-26
1 and remove the
2 and belt 3 .
COPYRIGHT © CANON ELECTRONICS INC. 2008
5) Remove the stop rings
Remove the bearings on both sides and
remove the reading roller (front)
Figure 3-408
Notes on assembling
When mounting the magnetic clutch, insert
the rotation stopper.
1 on both sides.
2 .
CANON DR-X10C FIRST EDITION