Base Unit-1 (Electrical System); Control Pcb - Canon imageFORMULA DR-X10C Service Manual

III. BASE UNIT-1 (ELECTRICAL SYSTEM)

1. Control PCB

1) Remove the right cover.
(Page 3-3)
2) Remove 5 screws
move the option PCB guide plate
Note: Do not deform the ambient leaf spring.
Figure 3-301
3) Remove the cable connected to the control
PCB 1 and 11 screws
remove the control PCB (with a plate).
Note: The connector (for the reading unit
(upper) and the DC power supply)
marked with
Figure 3-302
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 (TP head) and re-
1 .
2 (TP head) and
is one with a lock.
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) Remove 11 screws
screw 2 (M3, round tip) for the USB
connector and remove the control PCB
Figure 3-303
1 (M2.5×4) and
3 .
3-13