Pre-Imprinter Installation Procedure - Canon imageFORMULA DR-X10C Service Manual

3. Pre-imprinter Installation Procedure

No.
1 Take out the main body and accessories
from the box and check that the acces-
sories are present.
Bundled items
Main body
1
2 Screws (stepped)
3 Operation label
Lever operation label
4
5 Precautions for the user
Note:
1) Provide an ink cartridge for operation
check. The ink cartridge is separately
sold.
2) The ink pad for the pre-imprinter is built
in the frame detection unit of the
scanner main body.
2 Remove the eject tray unit, entrance
upper unit and upper reading roller
(front).
Refer to "CHAPTER 3, DISASSEMBLY &
REASSEMBLY" for details.
3 Open the upper unit and remove 2
screws 1 (M3, round tip) and remove
the screen plate
Note:
1) Use the removed screws (2) in the next
procedure.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step
.
2
CANON DR-X10C FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Details/Remarks
4-9