I. EXTERNAL PARTS
1. Document Feed Tray
1) Pull up the document feed tray
unhook the left and right fitting parts on
the inside one side at a time, and then
remove the document feed tray.
Figure 3-101
Note: This component may be removed
before
disassembling
components even if not specifically
directed.
COPYRIGHT © CANON ELECTRONICS INC. 2011
CHAPTER 3 DISASSEMBLY & REASSEMBLY
2. Document Eject Tray
,
1) Open the document eject tray
1
unhook it by bending the fitting part
on the left side. Next, unhook the fitting
part
the document eject tray.
Note: The one-way bearing that fits into the
fitting part on the right side may
become detached.
Note: This component may be removed
before
components even if not specifically
directed.
other
CANON DR-M160 FIRST EDITION
on the right side, then remove
3
Figure 3-102
disassembling
, then
1
2
other
3-1