Service Mode; Outline; Iii. Service Mode - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 5 TROUBLESHOOTING

III. SERVICE MODE

1. Outline

The service mode of this machine can
be executed by installing on the computer for
servicing the service mode software (service
tool) located in the setup disc bundled with
this machine.
This software is based on the software
for DR-4010C/5010C and can be used with
this machine. The software offers screens
suitable to each of these products.
The system requirements for the com-
puter to be used are the same as those
described in the "User Manual." The lower
the CPU performance or memory capacity,
the longer the processing time, but the ser-
vice mode can still be used.
Figure 5-201 shows the service screen.
Figure 5-301
5-6
The service screen displays the buttons
for selecting the various modes. Each ser-
vice mode is started from this screen.
COPYRIGHT © CANON ELECTRONICS INC. 2008 CANON DR-X10C FIRST EDITION