Eject Roller; Pickup Unit - Canon imageFORMULA DR-X10C Service Manual

7. Eject Roller

1) Remove the eject tray unit.
(Page 3-10)
2) Remove 2 screws
and remove 2 roller holding plates
eject roller 3 .
Figure 3-811
Notes on assembling
Assemble the D-cut shape at the center of
the roller shaft by aligning it with the guide.
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 (M3, self-tapping)
2 and
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY

8. Pickup Unit

1) Remove the upper front cover and main
drive PCB.
(Page 3-41), (Page 3-46)
2) Remove 9 screws
move the PCB mounting plate
Figure 3-812
3) Remove 2 screws
front of the pickup unit
fitting parts, remove the pickup unit.
Figure 3-813
1 (TP head) and re-
2 .
1 (TP head), lift the
2 , unhooking the
3-55