Names And Functions Of Parts; Front And Document Feed And Eject Trays - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

2.

Names and Functions of Parts

The names and functions of the parts of the ScanFront are shown below.
❏ Front and Document Feed and Eject Trays
a Tray Extension
Open this to prevent scanned documents from slipping off.
16
Chapter 1 Before Use
b Document Eject Tray
Open this tray when using the ScanFront.
c Panel Unit
Open this when there is a paper jam or to perform
maintenance. (See p. 48.)
d Touch Panel
Touch this screen to operate the ScanFront.
e Lock Lever
Locks the panel unit. Pull the lever toward you to unlock
the panel unit. (See p. 48.)
f Document Guides
Adjust these to match the width of the document. (See
p. 42.)
g Document Feed Tray
Place documents here. (See p. 38.)
h Feed Support
Pull this out to support loaded documents.
i Feed Extension Support
Open this when placing long paper in the scanner.