Lower; Eject Tray Unit - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
8. Lower Front Cover
1) Remove the pickup tray unit.
(Page 3-6)
2) Remove 3 screws
move the lower front cover
Figure 3-223
3-10
1 (TP head) and re-
2 .
COPYRIGHT © CANON ELECTRONICS INC. 2008

9. Eject Tray Unit

1) Open the upper unit and remove 3 screws
1 (TP head). In the same way, remove 3
screws on the opposite side.
Figure 3-224
2) Close the upper unit, lift the front of the
eject tray unit
1
front.
Figure 3-225
Notes on assembling
When assembling the eject tray unit in the
main body, do not hit it against the inside of
the right and left side plates to prevent
damage to painted surfaces.
a little, and draw it to the
CANON DR-X10C FIRST EDITION