Canon imageFORMULA DR-X10C Service Manual page 146

CHAPTER 4 INSTALLATION & MAINTENANCE
No.
8 Turn the power ON and make the com-
puter recognize the scanner.
Note:
1) If the "Auto USB Power Switch Setting"
is turned [ON] in the user mode, the
scanner is turned ON automatically
when the computer is turned ON with
the USB cable connected.
The "Auto USB Power Switch Setting"
is set to [OFF] at the factory.
9 Ensure that it operates correctly by using
the supplied "CapturePerfect 3.0" or "Job
Function". Refer to the "User Manual" for
the details.
"CHAPTER 1, GENERAL DESCRIP-
TION, III. User Operation" of this manual
provides its overview.
4-8
Step
COPYRIGHT © CANON ELECTRONICS INC. 2008
Details/Remarks
1) Press the power switch to turn this machine
ON. The pickup tray opens automatically.
Power Switch
2) Turn the computer power ON.
3) Windows recognizes this machine as a new
hardware and installs it automatically.
CANON DR-X10C FIRST EDITION