Main Motor - Canon imageFORMULA DR-X10C Service Manual

3. Main Motor

1) Remove the left cover.
(Page 3-5)
2) Remove the power supply PCB (with a
panel).
(Page 3-14)
3) Remove 2 screws
move the tension plate
3 and belt 4 .
Figure 3-307
COPYRIGHT © CANON ELECTRONICS INC. 2008
1 (TP head) and re-
2 , tension spring
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) Remove 3 cable holders
the cable 2 from the mounting plate.
Remove 3 screws
the mounting plate
turn it over while holding it with a hand.
Note: Do not pull it excessively because a
cable is connected.
Figure 3-308
5) Remove the cable holder and connector of
the cable 1 and remove the main motor
unit 2 from the main body.
Note: The DC power supply connector for the
cable has a lock.
Figure 3-309
1 and remove
3 (round tips), pull out
4 (with a motor), and
3-15