Installation Getting Started - Canon IRIScan Anywhere Duplex User Manual

Installation
Getting started
Step 1: Remove the protective tapes
Remove the protective tapes from the scanner and the inside of the document feeder, as
shown below.
Step 2: Charge the device
It is best to charge the device for 4-5 hours before starting the device.
1. Make sure that the scanner is stopped.
2. Connect the USB-C connector of the charging cable to the scanner's USB-C port.
3. Connect the USB connector of the charging cable to your computer's USB port.
During the charging of the device, the red battery indicator is permanently lit. When
charging is complete, the light comes in green.
Do not start the scanner while the charging of the battery is in progress.
Page 5