Switching The Feed And Eject Methods; Placing Documents For Standard Feeding - Canon imageFORMULA DR-C225 2 User Manual

Switching the Feed and Eject Methods

###HOME > Chapter 4 Placing Documents > Switching the Feed and
Eject Methods###
Use the two levers on the scanner to switch the feed and eject
methods based on the type of document you are scanning.
The feed and eject methods and lever positions for each document type
are as follows.
Feed method
Document type
(lever position)
Standard paper and Standard feeding (lower)
business cards
Plastic cards, thick Non separation feeding
paper, thin paper, (upper)
and bound or
fastened paper
Eject method
(lever position)
U-turn path (upper) or
straight path (lower)
Straight path (lower)
19

Placing Documents for Standard Feeding

###HOME > Chapter 4 Placing Documents > Placing Documents for
Standard Feeding###
Ordinarily, standard feeding should be used when scanning multiple
documents of a standard size at one time. Standard feeding enables
the multiple documents to be fed while separating each page.
1
Open the document feed tray.
2
Pull out the feed support.