Project Setup - Epilog Fusion M2 32 Manual

SECTION 6: USING THE EPILOG MAC DRIVER

Project Setup

While the Mac Driver will work with many different graphic
software packages, we'll be looking at Adobe Illustrator for
this example.
1. Click the Epilog icon to open the Epilog Viewer.
2. In this example, we'll set up an Aztec Calendar
engraving and cutting project. We've set up our
graphic on our page and are ready to select File/
Print.
3. The standard Illustrator print window will come up,
which will be different depending on which version
of Mac OS you are using. Set your Printer to Epilog
Engraver and PPD to Default (Epilog PDE). Click
Setup to access the laser settings.
4. Click on the Layout drop-down menu and select
Epilog Settings.
5. Set your laser Settings. We've set our Job Type to
Combined because we'll be both engraving and
cutting in this job. For Raster Settings, we've used
50% speed, 100% power. For Vector Settings,
we've used 30% speed, 70% power. Finally, our
resolution has been set to 600 DPI.
When you have your settings how you'd like them,
choose Print.
- 62 -
Project Setup