Epilog Fusion M2 32 Manual page 49

SECTION 4: THE EPILOG JOB MANAGER
Create Subfolders
First highlight the folder in the left panel where you want
to add a subfolder. Below we have highlighted the
Anamosa High School folder. Click the Add Subfolder
icon. Type the subfolder name in the Add SubFolder
field, then click the check mark to create the subfolder.
Move a Job Between Folders
You can also move any job to another folder or subfolder
by double-clicking on the job. Select the Folder and
Subfolder from the drop-down menus where you want to
save the job. You can save the job with the same name or
you can save as a new job. You can also modify your
laser settings and save them with the job. Click Save to
continue.
Using the Material Setting
Configurations
The Material Settings tab stores all of the suggested laser
parameters like speed, power, etc. These settings were
loaded based on the wattage you specified in the Laser
System tab (adding your laser was the very first thing
you did to start using the Job Manager).
To use the material settings that are automatically loaded
in your Job Manager, go to the Jobs tab and double-click
on the job you want to process.
Click the Import icon.
- 43 -
Using the Epilog Job Manager