Epilog Fusion M2 32 Manual page 36

SECTION 3: DRIVER INSTALLATION
14. Click Browse my Computer for driver software.
15. Use the Browse key to direct your computer to your
disc drive that contains the Epilog driver disc that
you inserted earlier in this process.
16. Find the disc drive with the Epilog install disc and
click OK.
17. Once you have the proper disc drive showing click
the Next key.
18. Wait while until the progress window disappears,
then you may be asked if you want to install this
driver. Click Always trust software from "Epilog
Corporation" then Install.
19. Your Epilog Laser Print Dashboard has been
successfully installed on the USB port. Click Close.
- 30 -
Windows 8 and 10: USB Installation