Epilog Fusion M2 32 Manual page 52

SECTION 4: THE EPILOG JOB MANAGER
Vector Sorting
You can determine the cutting order of vector lines directly
from the Epilog Job Manager.
You can choose from three different vector sorting options:
1. None: Vector line cutting order is determined by the
order they were created.
2. Optimized: The laser will process the vector lines
looking for the next closest node for quicker
vectoring.
3. Inside/Out: All internal vector paths in the file will
be process prior to the external vector paths. For
example, if cutting the letter O, the inner oval will be
cut before the outer oval.
Changing Program Settings
You can access the Program Settings by clicking on the
gear at the top left of the page.
On this screen you can set several different system
settings, including:
Display Tab:
• Language: Choose from several languages.
• Default Length Units: Choose from inches,
millimeters, or centimeters.
Alerts Tab:
Choose when the program asks for confirmation when
you delete machines, folders, subfolder, jobs and
materials, or pages.
- 46 -
Using the Epilog Job Manager