Epilog Fusion M2 32 Manual page 157

SECTION 11: OPTIONAL FEATURES
16. You can now print the file to the laser.
Make sure you print the image at the same
resolution as you set in step 6, or the image
will not engrave correctly!
Using CorelDRAW in Conjunction
with PLP
This section takes you through the steps to prepare a file
in CorelDRAW and use PLP to transform the image. This
allows you to use the powerful layout features of Corel or
other design software along with the photo transformation
capabilities of PLP.
1. Start by setting up
your file in CorelDRAW.
We've designed an 8" x
10" plaque, added the
text and placed a box
as a placeholder for the
photograph.
2. Crop the Photograph: Select the photograph, then
select from the menu bar Effects, PowerClip, and
Place Inside Container. Click the outline of the
photo placeholder to place the photo inside the box.
3. To resize or move the photograph in the powerclip
box, right click the photo and select Edit Powerclip.
When you are finished adjusting the image, right
click and select Finish Editing this Level.
4. Convert to Bitmap: With the photo selected click
Bitmaps, then Convert to Bitmap.
- 151 -
PhotoLaser Plus