Epilog Fusion M2 32 Manual page 30

SECTION 3: DRIVER INSTALLATION
13. Click Browse my Computer for driver software.
14. Use the Browse key to direct your computer to your
disc drive that contains the Epilog driver disc that
you inserted earlier in this process. (You can also
download the latest driver from
tech-support/epilog-drivers.htm.)
15. For this document we show the DVD RW drive as
the drive where the disc is located.
epiloglaser.com/
- 24 -
16. Once you have the proper disc drive showing click
on the Next key.
17. The progress window will appear.
18. If you see this screen, click Install.
19. Your Epilog Laser Dashboard print driver has been
successfully installed on the USB port. Click Close.
20. Click Close in the next window and then Close
again. You will then see your laser driver in the
Devices and Printers page. Click on the red X in the
upper right corner of this page. That's it! You are
ready to print to your laser.
21. If you will be printing from CorelDRAW, go to
"Setting Up CorelDRAW Beziers Setting" on page
31.
Windows 7: USB Installation