Introduction; N1100-On Series Hardware Overview; Power Consumption For N1100-On Series Poe Switches - Dell N1108T-ON Getting Started Manual

Introduction

This document provides basic information about the Dell Networking
N1100-ON Series switches, including how to install a switch and perform the
initial configuration. For information about how to configure and monitor
switch features, refer to the User Configuration Guide, which is available on
the Dell Support website at dell.com/support. See the Support website for
the latest updates on documentation and firmware.
NOTE:
Switch administrators are strongly advised to maintain Dell Networking
switches on the latest version of the Dell Networking Operating System (DNOS).
Dell Networking continually improves the features and functions of DNOS based on
feedback from you, the customer. For critical infrastructure, pre-staging of the new
release into a non-critical portion of the network is recommended to verify network
configuration and operation with the new DNOS version.

N1100-ON Series Hardware Overview

This section contains information about device characteristics and modular
hardware configurations for the Dell Networking N1100-ON Series switch.

Power Consumption for N1100-ON Series PoE Switches

Table 1-1 describes the power consumption for N1100-ON Series PoE
switches. The PoE power budget is 60W for the N1108P-ON, 185W for the
N1124P-ON, and 370W for the N1148P-ON.
Table 1-1. Power Consumption for N1100-ON Series PoE Switches
Model Input Voltage
N1108P-ON 100V/60Hz
110V/60Hz
120V/60Hz
220V/50Hz
240V/50Hz
Power Supply
Configuration
Main PSU
Main PSU
Main PSU
Main PSU
Main PSU
Maximum
Steady Current
Consumption (A)
0.95A
0.87A
0.80A
0.49A
0.45A
Getting Started Guide
Maximum
Steady
Power (W)
88.64W
88.43W
88.22W
89.28W
89.70W
5