4. To re-install the TPC, complete these steps in reverse order.
Removing the card cage skin
This card cage skin should never need to be removed unless it is damaged and requires replacement.
When looking at the rear of the projector, the card cage skin is located on the right-hand side of the
projector.
Estimated replacement time: 9 minutes
1. Turn off the projector and disconnect it from AC power.
2. Remove the top skin (on page 32).
3. Remove the two screws above the card cage.
4. Remove the card cage (on page 63).
5. Remove the four screws securing the skin to the projector.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Projector covers and feet
36