Service Guidelines; Ordering Parts; Replacing Modules; Interconnections And Line Drawings - Christie CP2208-LP Service Manual

Service guidelines

Review safety guidelines and information required for replacing modules.

Ordering parts

When ordering replacement parts, quote the part numbers of the items required. Quote the projector
model number, serial number, and date of manufacture, as indicated on the license label.
Not all parts are available separately. In addition, some parts stocked as inventory are available only
until the current supply lasts.
All part numbers are subject-to-change.

Replacing modules

To ensure you have the correct module and the projector module is replaced correctly, check module
markings, parts lists, and the relevant disassembly and replacement procedures.
Components must be replaced with exact equivalents. Failure to do so may result in unsafe operation.

Interconnections and line drawings

The interconnect diagram illustrates the path of electrical connections between modules.
Manufacturer's part numbers are included. Part numbers are subject to change.
Line drawings provide projector dimensions and sizes for installation.
To download the latest interconnect diagram or line drawings, visit www.christiedigital.com.

Servicing live equipment

Only Christie accredited technicians who are knowledgeable about the hazards associated with
hazardous voltage, ultraviolet exposure, and high temperatures are authorized to assemble, install,
and service Christie equipment.
To make sure you remain safe when servicing energized (live) Christie equipment:
• Locate the main AC power shut off prior to servicing the equipment. This will allow you to turn
the power off quickly in an emergency.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
9