Remove The Card Cage Skin - Christie CP2215 Service Manual

Remove the Card Cage Skin

This card cage skin should never need replacement unless it is damaged and requires replacement.
From the rear of the projector, the card cage skin is on the right-side of the projector.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
4. Remove the front skin. See
5. Remove the 2 screws above the card cage.
6. Remove the card cage. See
7. Remove the four screws that secure the skin to the corner brackets.
8. Remove the five screws from the bottom edge of the skin.
9. Pull the card cage panel out.
CP2215 Service Manual
020-101226-03 Rev. 1 (10-2015)
Remove the Top Lid on page 22.
Remove the Front Skin
Remove the Card Cage
Parts and Module Replacement
on page 22.
on page 41.
25