6. To focus the position I boresight guide, adjust the bottom-left boresight cap screw (D).
7. To focus the position II boresight guide, adjust the bottom-right boresight cap screw (E).
8. To focus the position III boresight guide, adjust the top boresight cap screw (F).
Turning the screws in small amounts (1/4 to 1/8 of a turn) allows you to make precise
adjustments.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Electronics
66