Electronics; Removing The Card Cage Lid - Christie M Series Service Manual

Electronics

Learn how to replace the electronic components and cards in the projector.

Removing the card cage lid

Removing the card cage lid reveals the flex cables and power cables to the panel driver (SHDPD). You
can also access the lamp driver boards and their power cables.
Estimated replacement time: 7 minutes.
1. Remove the top cover (on page 45).
2. Remove the card cage cover by removing the nine screws and one clip.
3. Remove the two screws securing the card cage lid to the bridge.
4. Remove the card cage lid.
5. To re-install, follow these steps in reverse order.
During assembly, make sure that the wires are not pinched between the lid and the card cage.
M Series Service Guide
020-100551-11 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
59